
Lawnframe – Hammer-In Stone Garden Edging
Finish your garden border this weekend
You've stared at that messy flower bed long enough.
The cheap plastic edging cracked. Real stone costs a fortune. And nobody wants to dig a trench in their lawn.

Lawnframe solves all three. Just hammer the deep-stake panels into the soil — no digging, no mortar, no help needed. The stone texture looks real up close. The UV-stable finish doesn't fade. And by Saturday evening, your border is finished, straight, and built to stay that way.
Ready to use right out of the box.

A top-reordered garden upgrade this season
✓ Hammer it in — no digging, no mortar
The deep-stake design pushes straight into the soil with a rubber mallet. No trenching, no mixing concrete, no hired help. Most beds are done in under an hour.

✓ Looks like real cut stone up close
Each panel is molded with natural slate texture and a soft gray finish. From two feet away, your guests assume it's real stone — not plastic.

✓ Stays put through rain and winter
The 4-inch ground stake locks each piece into the soil. No leaning, no popping up, no sliding after the first heavy rain.

✓ Curves, corners, or straight lines
The interlocking panels flex to follow any bed shape — around trees, along pathways, or in tight corners.

What you get today
- Lawnframe stone-look garden edging set
- Deep-stake design — installs with a rubber mallet
- Ready to use, no setup required
- Free tracked shipping
- 30-day at-home trial
Seasonal production run — once this batch sells out, restock pricing may change.
Finish your garden border this weekend — limited stock available at today's pricing.
30-day at-home trial
Try Lawnframe at home for 30 days. If it doesn't deliver the intended result or isn't as easy to install as described, return it for a full refund.
Frequently asked questions
How many feet of border does one set cover?
Each set of 20 panels covers approximately 8 feet of border when connected end-to-end. Measure your bed before ordering — many customers order two sets for a full flower bed.
Can I use this in clay or rocky soil?
Yes. The deep-stake design works in most soil types. For very rocky soil, pre-soak the ground or pre-dig small starter holes for each stake.
Will it survive freezing winters?
Yes. The polymer is rated for freeze-thaw cycles and won't crack like ceramic or concrete edging.
How do I clean it?
Just rinse with a garden hose. No special treatment needed.
How to use
- Step 1: Lay the panels along your border to plan the shape and length.
- Step 2: Connect the interlocking ends so they sit flush.
- Step 3: Place a rubber mallet on top of each panel and tap straight down until the stake is buried and the stone sits at lawn level.
- Step 4: Step back and check alignment. Adjust any leaning panels with one more tap.
Specifications
- Size: Each panel approx. 9.5 inches wide × 10 inches tall (4-inch stake)
- Material: UV-stabilized polymer resin
- Color: Natural slate gray
- Set includes: 20 panels (covers ~8 feet)
- Lasts: Multiple seasons, freeze-thaw rated
Finish your garden border this weekend
You've stared at that messy flower bed long enough.
The cheap plastic edging cracked. Real stone costs a fortune. And nobody wants to dig a trench in their lawn.

Lawnframe solves all three. Just hammer the deep-stake panels into the soil — no digging, no mortar, no help needed. The stone texture looks real up close. The UV-stable finish doesn't fade. And by Saturday evening, your border is finished, straight, and built to stay that way.
Ready to use right out of the box.

A top-reordered garden upgrade this season
✓ Hammer it in — no digging, no mortar
The deep-stake design pushes straight into the soil with a rubber mallet. No trenching, no mixing concrete, no hired help. Most beds are done in under an hour.

✓ Looks like real cut stone up close
Each panel is molded with natural slate texture and a soft gray finish. From two feet away, your guests assume it's real stone — not plastic.

✓ Stays put through rain and winter
The 4-inch ground stake locks each piece into the soil. No leaning, no popping up, no sliding after the first heavy rain.

✓ Curves, corners, or straight lines
The interlocking panels flex to follow any bed shape — around trees, along pathways, or in tight corners.

What you get today
- Lawnframe stone-look garden edging set
- Deep-stake design — installs with a rubber mallet
- Ready to use, no setup required
- Free tracked shipping
- 30-day at-home trial
Seasonal production run — once this batch sells out, restock pricing may change.
Finish your garden border this weekend — limited stock available at today's pricing.
30-day at-home trial
Try Lawnframe at home for 30 days. If it doesn't deliver the intended result or isn't as easy to install as described, return it for a full refund.
Frequently asked questions
How many feet of border does one set cover?
Each set of 20 panels covers approximately 8 feet of border when connected end-to-end. Measure your bed before ordering — many customers order two sets for a full flower bed.
Can I use this in clay or rocky soil?
Yes. The deep-stake design works in most soil types. For very rocky soil, pre-soak the ground or pre-dig small starter holes for each stake.
Will it survive freezing winters?
Yes. The polymer is rated for freeze-thaw cycles and won't crack like ceramic or concrete edging.
How do I clean it?
Just rinse with a garden hose. No special treatment needed.
How to use
- Step 1: Lay the panels along your border to plan the shape and length.
- Step 2: Connect the interlocking ends so they sit flush.
- Step 3: Place a rubber mallet on top of each panel and tap straight down until the stake is buried and the stone sits at lawn level.
- Step 4: Step back and check alignment. Adjust any leaning panels with one more tap.
Specifications
- Size: Each panel approx. 9.5 inches wide × 10 inches tall (4-inch stake)
- Material: UV-stabilized polymer resin
- Color: Natural slate gray
- Set includes: 20 panels (covers ~8 feet)
- Lasts: Multiple seasons, freeze-thaw rated
Original: $109.99
-70%$109.99
$33.00Description
Finish your garden border this weekend
You've stared at that messy flower bed long enough.
The cheap plastic edging cracked. Real stone costs a fortune. And nobody wants to dig a trench in their lawn.

Lawnframe solves all three. Just hammer the deep-stake panels into the soil — no digging, no mortar, no help needed. The stone texture looks real up close. The UV-stable finish doesn't fade. And by Saturday evening, your border is finished, straight, and built to stay that way.
Ready to use right out of the box.

A top-reordered garden upgrade this season
✓ Hammer it in — no digging, no mortar
The deep-stake design pushes straight into the soil with a rubber mallet. No trenching, no mixing concrete, no hired help. Most beds are done in under an hour.

✓ Looks like real cut stone up close
Each panel is molded with natural slate texture and a soft gray finish. From two feet away, your guests assume it's real stone — not plastic.

✓ Stays put through rain and winter
The 4-inch ground stake locks each piece into the soil. No leaning, no popping up, no sliding after the first heavy rain.

✓ Curves, corners, or straight lines
The interlocking panels flex to follow any bed shape — around trees, along pathways, or in tight corners.

What you get today
- Lawnframe stone-look garden edging set
- Deep-stake design — installs with a rubber mallet
- Ready to use, no setup required
- Free tracked shipping
- 30-day at-home trial
Seasonal production run — once this batch sells out, restock pricing may change.
Finish your garden border this weekend — limited stock available at today's pricing.
30-day at-home trial
Try Lawnframe at home for 30 days. If it doesn't deliver the intended result or isn't as easy to install as described, return it for a full refund.
Frequently asked questions
How many feet of border does one set cover?
Each set of 20 panels covers approximately 8 feet of border when connected end-to-end. Measure your bed before ordering — many customers order two sets for a full flower bed.
Can I use this in clay or rocky soil?
Yes. The deep-stake design works in most soil types. For very rocky soil, pre-soak the ground or pre-dig small starter holes for each stake.
Will it survive freezing winters?
Yes. The polymer is rated for freeze-thaw cycles and won't crack like ceramic or concrete edging.
How do I clean it?
Just rinse with a garden hose. No special treatment needed.
How to use
- Step 1: Lay the panels along your border to plan the shape and length.
- Step 2: Connect the interlocking ends so they sit flush.
- Step 3: Place a rubber mallet on top of each panel and tap straight down until the stake is buried and the stone sits at lawn level.
- Step 4: Step back and check alignment. Adjust any leaning panels with one more tap.
Specifications
- Size: Each panel approx. 9.5 inches wide × 10 inches tall (4-inch stake)
- Material: UV-stabilized polymer resin
- Color: Natural slate gray
- Set includes: 20 panels (covers ~8 feet)
- Lasts: Multiple seasons, freeze-thaw rated























